TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 219 of 968
TM 9-2320-365-20-4 16-29. M1079 RUBBER BUMPER AND TEE LATCH REPLACEMENT This task covers: a. Rubber Bumper Removal b. Rubber Bumper Installation c. Tee Latch Removal d. Tee Latch Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Lockwasher (Item 81, Appendix G) Lockwasher (4) (Item 77, Appendix G) Sealing Compound (Item 67, Appendix D) a. Rubber Bumper Removal. NOTE Left and right side rubber bumpers are removed the same way. Left side shown. (1) Remove screw (1), lockwasher (2), rubber bumper (3), and spacer (4) from van body (5). Discard lock-washer. (2) Remove sealing compound from van body (5). b. Rubber Bumper Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply sealing compound to van body (5). (2) Install spacer (4) and rubber bumper (3) on van body (5) with lockwasher (2) and screw (1). 16-171