TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 217 of 968
TM 9-2320-365-20-4 16-27. M1079 ROOF BAIL HANDLE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Sealing Compound (Item 67, Appendix D) Lockwasher (4) (Item 78, Appendix G) a. Removal. (1) Remove sealing compound from heads of four screws (1). (2) Remove four screws (1), lockwashers (2), washers (3), and bail handle (4) from van body (5). Discard lockwashers. (3) Remove sealing compound from van body (5). b. Installation. (1) Install bail handle (4) on van body (5) with four washers (3), lockwashers (2), and screws (1). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (2) Apply sealing compound around heads of four screws (1). End of Task. 16-169