TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 216 of 968
TM 9-2320-365-20-4 16-26. M1079 SLING BEARING ANGLE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Sealing Compound (Item 67, Appendix D) a. Removal. (1) Remove 24 screws (1) from sling bearing angle (2). (2) Remove sealing compound from edges of sling bearing angle (2). (3) Remove sling bearing angle (2) from van body (3). (4) Remove sealing compound from van body (3). b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply sealing compound to inside edge of sling bearing angle (2). (2) Install sling bearing angle (2) on van body (3) with 24 screws (1). (3) Apply sealing compound on edges of sling bearing angle (2). End of Task. 16-168