TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 214 of 968
TM 9-2320-365-20-4 16-25. M1079 LIFT CASTING REPLACEMENT (CONT) (5) Pry lift casting (1) over blind rivet nut heads (7) on top and side of van body (8). (6) Remove lift casting (1) from van body (8). (7) Remove sealing compound from van body (8). b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE All four lift castings are installed the same way. Left front lift casting shown. (1) Apply sealing compound to van body (1) on area where lift casting (2) attaches. (2) Apply sealing compound to inside surface of lift casting (2). (3) Position lift casting (2) on van body (1). 16-166