TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 205 of 968
TM 9-2320-365-20-4 (2) Enlarge 71 holes in spacers (2,3,4, and 5). CAUTION Use 100 degree countersink to perform steps (3) and (4). Failure to comply may result in damage to equipment. (3) Countersink 71 holes in spacers (2,3,4, and 5). (4) Countersink 25 holes in van body trim angle (6). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE Sealing compound will become unusable two hours after being mixed. (5) Apply sealing compound to 29 blind rivet nuts (7) and spacer (2). (6) Install spacer (2) on van body wall (1) with 29 blind rivet nuts (7). 16-157