TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 200 of 968
TM 9-2320-365-20-4 16-23. M1079 POD FRAME REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Van body removed (para 16-19) Air conditioner kit removed, if equipped (para 20-81). Pod doors and panels removed (para 16-22). Heater kit removed, if equipped (para 20-41). Fan assembly removed, if equipped (para 16-67). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Goggles, Industrial (Item 15, Appendix C) Drill, Electric (Item 7, Appendix C) Drill Set, Twist (Item 6, Appendix C) Tool Kit, Blind Rivet (Item 43, Appendix C) Sling, Cargo (2) (Item 31, Appendix C) Materials/Parts Sealing Compound (Item 67, Appendix D) Nut, Blind Rivet (96) (Item 110, Appendix G) Screw, Machine (96) (Item 241, Appendix G) Washer, Flat (96) (Item 270, Appendix G) Lockwasher (96) (Item 97, Appendix G) Rivet, Blind (as required) (Item 230, Appendix G) Blade, Hand Hacksaw (Item 14.1, Appendix D) Frame, Hand Hacksaw (Item 14.1, Appendix B) Personnel Required (2) WARNING • Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. • Pod frame weighs approximately 80 lbs (36 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. a. Removal. (1) Remove sealing compound from edges of pod frame (1). 16-152 Change 1