TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 177 of 968
TM 9-2320-365-20-4 16-19. M1079 VAN BODY REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions AC power disconnected (TM 9-2320-365-10). Batteries disconnected (para 7-48). Heater kit removed, if equipped (para 20-41). Air conditioner kit removed, if equipped (para 20-81). Tools and Special Tools Sling, Eye (4) (Item 64, Appendix B) Link, Chain, End (Item 36, Appendix B) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Box and Open End, Combination (Item 51.1, Appendix C) Materials/Parts Rope, Fibrous (Item 53, Appendix D) Pad, Cushioning (2) (Item 194, Appendix G) Pad, Cushioning (2) (Item 195, Appendix G) Personnel Required (3) a. Removal. WARNING Remove all loose equipment from van body. Failure to comply may result in injury to personnel or damage to equipment. (1) Disconnect connector P173 (1) from connector J173 (2). NOTE Left and right van body mounting hardware is removed the same way. Left side shown. (2) Remove lynch pin (3) from bolt (4). (3) Remove slotted nut (5), washer (6), bolt (4), and washer (7) from sub-frame (8). Change 1 16-129