TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 172 of 968
TM 9-2320-365-20-4 16-17. CAB STORAGE BOX REPLACEMENT/REPAIR (CONT) c. Assembly. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE Only right storage box is equipped with a tray. Perform steps (1) and (2) on right storage box. (1) Apply adhesive to top edges of storage box tray (1). (2) Install rubber channel (2) on storage box tray (1). (3) Install 12 rubber bumpers (3) in storage box (4). (4) Install two latches (5) on storage box (4) with four screws (6) and nuts (7). (5) Install clamp (8) on storage box (4) with two screws (9) and nuts (10). (6) Install rubber grommet (11) in storage box (4). (7) Install cover support arm (12) in storage box (4) with washer (13) and cotter pin (14). 16-124