TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 167 of 968
TM 9-2320-365-20-4 c. Assembly. (1) Cut two seals (1) to 8.75 in. (22.2 cm) long. (2) Cut two seals (2) to 11.15 in. (28.3 cm) long. (3) Install two seals (1) and seals (2) on tool box door (3) 0.12-0.20 in. (0.3-0.5 cm) offset from edge of tool box door. (4) Install bail (4) and stop washer (5) on shaft (6). (5) Install plate (7) and shaft (6) on tool box door (3) with spring washer (8), key washer (9), and nut (10). (6) Bend up two tabs on key washer (9) (7) Install latch pawl (11) on shaft (6). NOTE Tool boxes disassembled with rivets attaching tool box door, will require tool box door and tool box mounting holes be enlarged to 0.250 in. (0.625 cm). (7.1) Drill out 5 holes in tool box (13) and tool box door (3). (8) Install hinge (12) on tool box (13) with five screws (13.1) and nuts (13.2). (9) Install tool box door (3) on hinge (12) with five screws (14) and nuts (15). Change 1 16-119