TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 157 of 968
TM 9-2320-365-20-4 e. Seat Assembly. NOTE Plastic film to be provided in replacement seat cover kit. (1) Position plastic film (1) over seat back (2). (2) Install two wire supports (3) in seat back cover (4). (3) Position seat back cover (4) tightly over plastic film (1) and seat back (2). WARNING Wear appropriate eye protection when installing hog rings. Hog rings are under tension and can act as projectiles when being installed. Failure to comply may result in injury to personnel. CAUTION Ensure hog rings are crimped over wire support wires on bottom of seat back frame. Failure to comply may result in damage to equipment. (4) Install five hog rings (5) equally spaced on seat back cover (4). (6) Install two hog rings (8) on front of seat bottom cover (6). (7) Install two hog rings (9) on rear of seat bottom cover (6). (8) Install six hog rings (10) on left and right side of seat bottom cover (6). Change 1 16-110.1 (5) Position seat bottom cover (6) tightly on seat bottom (7).