TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 145 of 968
TM 9-2320-365-20-4 (4) Remove two self-locking nuts (10), washers (11), screws (12), and cab step tread (1) from cab step (2). Discard self-locking nuts. (5) Remove two seals (13) and seal (14) from cab step tread (1). Discard seals. (6) Remove turnlock receptacle (15) from cab step (2). Discard turnlock receptacle. (7) Remove pin (16) from stud fastener (17). (8) Remove stud fastener (17), washer (18), and grommet (19) from cab step tread (1). Discard grommet. b. Installation. NOTE Left and right cab steps are installed the same way. Left cab step shown. (1) Position stud fastener (1) in cab step tread (2) with grommet (3) and washer (4). (2) Install pin (5) in stud fastener (1). 16-99