TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 144 of 968
TM 9-2320-365-20-4 16-11. CAB STEP REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Windshield washer reservoir and pump removed (left side cab step) (para 18-2). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Materials/Parts Nut, Self-Locking (10) (Item 148, Appendix G) Grommet, Nonmetallic (Item 50, Appendix G) Receptacle (Item 213, Appendix G) Seal, Nonmetallic (Item 252, Appendix G) a. Removal. NOTE Left and right cab steps are removed the same way. Left cab step shown. (1) Open cab step tread (1) on cab step (2). (2) Remove four self-locking nuts (3), eight washers (4), and four screws (5) from cab step (2). Discard self-locking nuts. (3) Remove four self-locking nuts (6), eight washers (7), four screws (8), and cab step (2) from fender (9). Discard self-locking nuts. 16-98