TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 141 of 968
TM 9-2320-365-20-4 o. M1079 Front Splash Shield Removal. NOTE Right and left side splash guards are removed the same way. Right side shown. (1) Remove three self-locking nuts (1), brace (2), splash guard (3), and three screws (4) from bracket (5). Discard self-locking nuts. (2) Remove two self-locking nuts (6), screws (7) and bracket (5) from clamp (8). Discard self-locking nuts. NOTE Note position of clamps on sub-frame prior to removal. (3) Remove two self-locking nuts (9), clamps (10), screws (11) and clamps (8) from sub-frame (12). Discard self- locking nuts. p. M1079 Front Splash Shield Installation. NOTE Right and left side splash guards are installed the same way. Right side shown. (1) Position two clamps (1) and clamps (2) on sub-frame (3) with two screws (4) and self-locking nuts (5). (2) Position bracket (6) on clamp (2) with two screws (7) and self-locking nuts (8). (3) Tighten self-locking nuts (5). (4) Tighten self-locking nuts (8) to 26-32 lb-ft (35-43 N·m). (5) Install splash guard (9) and brace (10) on bracket (6) with three screws (11) and self-locking nuts (12). Change 1 16-96.1