TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 131 of 968
TM 9-2320-365-20-4 e. Rear Splash Guard Removal. NOTE Left and right rear splash guards are removed the same way. Right side shown. Remove three nuts (1), washers (2), spacers (3), screws (4), and rear splash guard (5) from bumper (6). f. Rear Splash Guard Installation. NOTE Left and right rear splash guards are installed the same way. Right side shown. (1) Position rear splash guard (1) on bumper (2) with three screws (3), spacers (4), washers (5), and nuts (6). (2) Tighten three nuts (6) to 18-22 lb-ft (24-30 N·m). g. Rear Fender Removal. NOTE Left and right rear fenders are removed the same way. Right side shown. (1) Remove two nuts (1), four washers (2), two screws (3), and rear fender (4) from bracket (5). 16-87