TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 128 of 968
TM 9-2320-365-20-4 16-10. FENDER AND SPLASH GUARD REPLACEMENT (CONT) (8) Position three screws (12), six washers (13), and three self-locking nuts (14) in front fender (3). (9) Tighten three self-locking nuts (14) to 18-22 lb-ft (24-30 N·m). NOTE Perform steps (10) and (11) on right side. (10) Position four screws (15), eight washers (16), and four self-locking nuts (17) in front fender (3). (11) Tighten four self-locking nuts (17) to 18-22 lb-ft (24-30 N·m). NOTE Perform steps (12) through (14) on left side. (12) Position lockwasher (18) and terminal lug TL94 (19) on front fender (3) with washer (20), screw (21), washer (22), and self-locking nut (23). (13) Position three screws (24), six washers (25), and three self-locking nuts (26) in front fender (3). (14) Tighten self-locking nut (23) and three self-locking nuts (26) to 18-22 lb-ft (24-30 N·m). 16-84