TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 121 of 968
TM 9-2320-365-20-4 WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (4) Apply antiseize compound to threads of nipple (9) and 90-degree fitting (9.1). (5) Install nipple (9) in air spring (10). (5.1) Install 90-degree fitting (9.1) on nipple (9). (6) Position air spring (10) on rear cab support assembly (11) with four screws (12) and self-locking nuts (13). NOTE Step (7) requires the aid of an assistant. (7) Tighten four self-locking nuts (13) to 45-61 lb-ft (61-83 N·m). (8) Position four screws (14) and self-locking nuts (15) in air spring (10). (9) Connect air hose (16) to 90-degree fitting (9.1). (10) Lower cab (TM 9-2320-365-10). (11) Inflate cab air springs (TM 9-2320-365-10). NOTE Step (12) requires the aid of an assistant. (12) Tighten four self-locking nuts (15) to 45-61 lb-ft (61-83 N·m). Change 1 16-77