TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 113 of 968
TM 9-2320-365-20-4 (9) Remove four self-locking nuts (18), screws (19), and air spring (9) from rear cab support assembly (10). Discard self-locking nuts. (10) Remove 90-degree fitting (15) from tee fitting (20). (11) Remove check valve (13) from tee fitting (20). (12) Remove tee fitting (20) from pipe fitting (21). (13) Remove pipe fitting (21) from air spring (9). (14) Remove four self-locking nuts (22), washers (23), screws (24), and mounting bracket (2) from right frame rail (25). Discard self-locking nuts. b. Right Air Spring and Bracket Installation. (1) Position mounting bracket (1) on right frame rail (2) with four screws (3), washers (4), and self-locking nuts (5). NOTE Step (1.1 and 2) requires the aid of an assistant. (1.1) Rotate mounting bracket (1) clockwise to the maximum angle permitted by mounting hole clearance. (2) Tighten four self-locking nuts (5) to 58-76 lb-ft (79-103 N·m). Change 1 16-71