TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 107 of 968
TM 9-2320-365-20-4 16-8. CAB LEVELING VALVE AND LINKAGE REPLACEMENT/ADJUSTMENT This task covers: a. Removal b. Installation c. Cab Leveling Valve Adjustment d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab air springs deflated (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Air tanks drained (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Nut, Self-Locking (4) (Item 134, Appendix G) Nut, Self-Locking (2) (Item 138, Appendix G) Personnel Required (2) a. Removal. (1) Remove self-locking nut (1) from lever (2). Discard self- locking nut. (2) Remove two self-locking nuts (3), washers (4), screws (5), and cab leveling valve (6) from bracket (7). Discard self-locking nuts. NOTE Tag air hoses and connection points prior to disconnecting. (3) Disconnect two air hoses (8) from cab leveling valve (6). (3.1) Disconnect air hose (8.1) from cab leveling valve (6) and tee fitting (8.2). (3.2) Disconnect tee fitting (8.2) from two air hoses (8.3). Change 1 16-65