TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 106 of 968
TM 9-2320-365-20-4 16-7. REAR CAB SUPPORT ASSEMBLY REPLACEMENT (CONT) (13) Lower cab (TM 9-2320-365-10). CAUTION Latches must be adjusted so that they ride squarely on the latch supports and do not contact the welded area of the latch supports. Failure to comply may result in damage to equipment. (14) Adjust two latches (14) on latch supports (15). (15) Raise cab (TM 9-2320-365-10). CAUTION Do not allow latches to change position while tightening screws. Failure to comply may result in damage to equipment. (16) Tighten four screws (13) to 34-44 lb-ft (46-60 N·m). (17) Lower cab (TM 9-2320-365-10). (18) Inflate cab air springs (TM 9-2320-365-10). NOTE • Perform step (19) on left and right sides of rear cab support. • Step (19) requires the aid of an assistant. (19) Tighten four self-locking nuts (16) to 45-61 lb-ft (61-83 N·m). c. Follow-On Maintenance. (1) Adjust cab hydraulic latch (para 19-6). (2) Adjust cab leveling valve (para 16-8). End of Task. 16-64 Change 1