TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 988 of 1268
TM 9-2320-365-20-3 Section II. MAINTENANCE PROCEDURES 14-2. FRONT BUMPER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Blackout drive light removed (para 7-30). Composite front light assemblies removed (para 7-33). Gravel deflector and gravel deflector extension removed (para 14-7). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Nut, Self-Locking (4) (Item 146, Appendix G) Nut, Self-Locking (2) (Item 116, Appendix G) Lockwasher (2) (Item 103, Appendix G) Personnel Required (2) a. Removal. WARNING • Leave shackles installed in front bumper to support front bumper until ready to remove. Failure to comply may result in injury to personnel. • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. (1) Deleted. (2) Deleted. 14-2 Change 1