TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 984 of 1268
TM 9-2320-365-20-3 13-36 Change 2 13-10 POWER STEERING PUMP RESERVOIR FILTER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10-1) Cab raised (TM 9-2320-365-10-1) Power steering pump reservoir drained (Appendix H) Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Pan, Drain (Item 24, Appendix C) Materials/Parts Cap and Plug Set (Item 15, Appendix D0 Oil, Lubricating, OE/HDO 10 (Item 43, Appendix D) Head, Fluid Filter (Item 55.1, Appendix G) Seal, Nonmetallic (Item 270.1, Appendix G) Personnel Required (2) a. Removal. (1) Remove cap (1) from power steering reservoir (2). (2) Press down and turn T-handle (3) counter clockwise. (3) Remove T-handle (3) from power steering reservoir (2). (4) Remove seal (4) from cap (1). Discard seal. CAUTION Cap or plug hydraulic connections to prevent contamination of power steering system. Failure to comply may result in damage to equipment.