TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 982 of 1268

TM 9-2320-365-20-3 13-9. POWER STEERING PUMP REPLACEMENT (CONT) c. Installation. (1) Install spline adapter (1) on power steering pump (2). (2) Install preformed packings (3 and 4) on 90-degree fittings (5 and 6). (3) Install 90-degree fittings (5 and 6) in power steering pump (2). CAUTION Spline adapter must be installed properly into groove of air compressor. Failure to comply may result in damage to equipment. (4) Position gasket (7) and power steering pump (2) on air compressor (8) with two washers (9) and bolts (10). (5) Tighten two bolts (10) to 43-52 lb-ft (58-71 N·m). 13-34 Change 1