TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 980 of 1268
TM 9-2320-365-20-3 13-9. POWER STEERING PUMP REPLACEMENT This task covers: a. Removal b. Inspection c. Installation d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Adjustable (Item 50, Appendix C) Dispensing Pump, Hand Driven (Item 5, Appendix C) Tools and Special Tools (Cont) Pan, Drain (Item 24, Appendix C) Socket Wrench Attachment, Screwdriver (Item 47, Appendix B) Materials/Parts Cap and Plug Set (Item 15, Appendix D) Gasket, (Item 40.1, Appendix G) Packing, Preformed (Item 166.1, Appendix G) Packing, Preformed (Item 165, Appendix G) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) a. Removal. (1) Remove fluid from power steering reservoir (1). CAUTION Cap or plug hydraulic hoses and fittings to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hoses, tubes and connection points prior to disconnecting. (2) Loosen clamp (2) on hose (3). (3) Disconnect hose (3) from tube (4). (4) Disconnect hose (5) from 90-degree fitting (6). (5) Remove tube (4) from 90-degree fitting (7). 13-32 Change 1