TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 977 of 1268
TM 9-2320-365-20-3 Change 2 13-30.1/(13-30.2 Blank) (17) Position clamp (21) on return hose (25). (18) Connect return hose (25) on power steering pump reservoir (11). (19) Engage as many clamp tabs (23) as possible in tab windows (24) allowing little or no play between clamp (21) and return hose (25). (20) Tighten clamp (21) to 8-9 lb-in. (1 N •m). (21) Measure gap on clamp (21). CAUTION Clamp tongue must be started in clamp groove. Failure to comply may result in damage to equipment. NOTE Minimum allowable gap on clamp is 0.2 in. (5 mm). If gap is less than 0.2 in. (5 mm), remove and re-install clamp.