TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 976 of 1268
TM 9-2320-365-20-3 13-30 Change 2 13-8. POWER STEERING PUMP RESERVOIR AND BRACKET REPLACEMENT (CONT) (10) Position clamp (15) on suction hose (19). (11) Connect suction hose (19) on power steering pump reservoir (11). (12) Engage as many clamp tabs (19) as possible in tab windows (18) allowing little or no play between clamp (15) and suction hose (13). (13) Tighten clamp (15) to 12-18 lb-in. (1-2 N •m). (14) Measure gap on clamp (15). (15) Loosen screw (20) in clamp (21) as far as possible without disengaging screw from D-nut (22). (16) Unhook clamp tabs (23) from tab windows (24). CAUTION Clamp tongue must be started in clamp groove. Failure to comply may result in damage to equipment. NOTE Minimum allowable gap on clamp is 0.2 in. (5 mm). If gap is less than 0.2 in. (5 mm), remove and re-install clamp.