TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 970 of 1268
TM 9-2320-365-20-3 13-8. POWER STEERING PUMP RESERVOIR AND BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Auxiliary starter solenoid removed (para 7-6). Power steering pump reservoir drained (Appendix H). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Dispensing Pump, Hand Driven (Item 5, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B) Materials/Parts Cap and Plug Set (Item 15, Appendix D) Oil, Lubricating, OE/HDO 10 (Item 43, Appendix D) Nut, Self-Locking (2) (Item 140, Appendix G) Clamp (Item 7, Appendix G) Clamp (Item 8, Appendix G) a. Removal. CAUTION Cap or plug hydraulic connections to prevent contamination of power steering system. Failure to comply may result in damage to equipment. NOTE Perform steps (1) through (3) on vehicles that have not previously had a power steering pump reservoir or power steering return hose replaced. (1) Pry hose clamp end (1) open. (2) Disconnect return hose (2) from power steering pump reservoir (3). (3) Remove hose clamp (1) from return hose (2). Discard hose clamp. 13-26 Change 1