Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 968 of 1268

TM 9-2320-365-20-3 13-7. POWER STEERING HOSES AND TUBE REPLACEMENT (CONT) CAUTION Clamp tongue must be started in clamp groove. Failure to comply may result in damage to equipment. (4) Position clamp (4) on suction hose (8). (5) Install suction hose (8) on power steering reservoir (9). (6) Engage as many clamp tabs (6) as possible in tab windows (7) allowing little or no play between clamp (4) and suction hose (8). (7) Tighten clamp (4) to 12-18 lb-in. (1-2 N·m). NOTE Minimum allowable gap on clamp is 0.2 in. (0.5 cm). If gap is less than 0.2 in. (0.5 cm), remove and re-install clamp. (8) Measure gap on clamp (4). 13-24