TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 954 of 1268

TM 9-2320-365-20-3 13-5. FRONT WHEEL TOE-IN ALIGNMENT/ADJUSTMENT (CONT) NOTE Chains may not be equal distance from flat surface. High end of gage may require adjustment to level out chains. (4) Adjust wheel alignment gage until both chains are touching flat surface. NOTE If toe-in is out of alignment perform Toe-In Adjustment. (5) Wheel alignment gage pointer should read 0 to 1/8 in. b. Toe-In Adjustment. (1) Loosen nuts (1) on tie rod clamps (2). NOTE Proper toe-in is 0 to 1/8 in. (2) Observe movable scale and rotate tie rod (3) to obtain proper toe-in measurement. (3) Tighten nuts (1) on tie rod clamps (2). (4) Remove wheel alignment gage from front tires. End of Task. 13-10