TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 951 of 1268
TM 9-2320-365-20-3 d. Installation. NOTE Left and right tie rod ends are installed the same way. Left side shown. (1) Install tie rod (1) in two steering knuckle arms (2). (2) Install slotted nut (3) on each end of tie rod (1). (3) Tighten two slotted nuts (3) to 140-180 lb-ft (190-244 N·m). NOTE If slots in slotted nuts do not line up with cotter pin holes in tie rod ends, tighten slotted nut until slots and cotter pin holes are aligned. (4) Install cotter pin (4) in each end of tie rod (1). e. Follow-On Maintenance. (1) Lower cab (TM 9-2320-365-10). (2) Lubricate tie rod end (Appendix H). (3) Perform front wheel toe-in alignment (para 13-5). End of Task. Change 1 13-8.1/(13-8.2 Blank)