TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 949 of 1268
TM 9-2320-365-20-3 13-4. TIE-ROD REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C) Tools and Special Tools (Cont) Socket, Socket Wrench (Item 37, Appendix C) Wrench Set, Socket (Item 48, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Pin, Cotter (2) (Item 200, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Left and right tie rod ends are removed the same way. Left side shown. (1) Remove cotter pin (1) and slotted nut (2) from each end of tie rod (3). Discard cotter pins. (2) Remove tie rod (3) from two steering knuckle arms (4). Change 1 13-7