TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 944 of 1268
TM 9-2320-365-20-3 13-3. DRAG LINK REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Steering wheel turned fully left (TM 9-2320-365- 10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C) Tools and Special Tools (Cont) Separator, Ball Joint (Item 54, Appendix B) Wrench Set, Socket (Item 48, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Pin, Cotter (2) (Item 205, Appendix G) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Remove cotter pin (1) from drag link (2). Discard cotter pin. (2) Remove slotted nut (3) from drag link (2). (3) Remove drag link (2) from pitman arm (4). 13-4 Change 1