TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 927 of 1268
TM 9-2320-365-20-3 12-6. CENTRAL TIRE INFLATION SYSTEM (CTIS) ECU REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) a. Removal. (1) Disconnect connector P110 (1) from CTIS ECU (2). (2) Remove screw (3), washer (4), and terminal lug TL50 (5) from CTIS ECU (2). (3) Remove two screws (6), washers (7), and CTIS ECU (2) from personnel heater (8). b. Installation. (1) Install CTIS ECU (2) on personnel heater (8) with terminal lug TL50 (5), washer (4), and screw (3). (2) Install two washers (7) and screws (6) in CTIS ECU (2). (3) Connect connector P110 (1) to CTIS ECU (2). c. Follow-On Maintenance. (1) Start engine (TM 9-2320-365-10). (2) Operate CTIS and check for proper operation (TM 9- 2320-365-10). (3) Shut down engine (TM 9-2320-365-10). End of Task. 12-15