Sign up to sell your inventory with NSN Lookup

TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 926 of 1268

TM 9-2320-365-20-3 12-14 Change 2 12-5. CENTRAL TIRE INFLATION SYSTEM (CTIS) HOSE ASSEMBLIES, MANIFOLD VALVE, KNEELING VALVE AND BRACKET REPLACEMENT (CONT) NOTE (19) Position CTIS hose (17) on hollow wheel stud (18) with two seals (19) and banjo bolt (20). NOTE (20) Tighten banjo bolt (20) to 22-28 lb-ft (30-38 N•m). NOTE (21) Position two seals (19), screw (21), and nut (22) on CTIS hose (17). (22) Tighten nut (22) to 22-28 lb-ft (30-38 N•m). (23) Install valve core (23) in CTIS manifold valve (12). (24) Install valve cap (24) on CTIS manifold valve (12). c. Follow-On Maintenance. (1) Install rim cover, if equipped (Para 12-10). (2) Start engine (TM 9-2320-365-10-1) and allow time for CTIS to inflate tire. (3) Shut down engine (TM 9-2320-365-10-1). (4) Check for air leaks around CTIS hoses, CTIS manifold valve assembly, and kneeling valve or hose adapter. End of Task. Perform steps (21) and (22) if wheel will be installed in spare tire retainer. Place a screwdriver behind CTIS hose assembly while tightening banjo bolt to keep CTIS hose assembly from contacting wheel studs. Perform steps (19) and (20) if wheel is mounted on vehicle.