TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 920 of 1268
TM 9-2320-365-20-3 12-8 Change 2 12-5. CENTRAL TIRE INFLATION SYSTEM (CTIS) HOSE ASSEMBLIES, MANIFOLD VALVE, KNEELING VALVE AND BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Air tanks drained (TM 9-2320-365-10). Rim cover removed, if equipped (Para 12-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Fishing Tool, Pneumatic Tire Valve (Item 9, Appendix C) Socket, Socket Wrench (Item 68, Appendix B) Socket, Socket Wrench (Item 36, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench Set, Socket (Item 48, Appendix C) Tools and Special Tools (Cont) Adapter, Socket Wrench (Item 2, Appendix B) Materials/Parts Packing, Preformed (Item 160, Appendix G) Packing, Preformed (2) (Item 189, Appendix G) Packing, Preformed (Item 190, Appendix G) Seal, Nonmetallic (2) (Item 255, Appendix G) Filter Element, Fluid (Item 16, Appendix G) Sealing Compound (Item 62, Appendix D) a. Removal. (1) Remove valve cap (1) from CTIS manifold valve (2). (2) Remove valve core (3) from CTIS manifold valve (2) and allow time for tire to deflate. NOTE (3) Remove banjo bolt (4), CTIS hose (5), and two seals (6) from hollow wheel stud (7). Discard seals. NOTE (4) Remove nut (8), screw (9), and two seals (6) from CTIS hose (5). Discard seals. WARNING The sudden release of high pressure air can cause damage to eyes. Wear appropriate eye protection when working near pressurized air. Failure to comply may result in injury to personnel. Perform step (3) if wheel is mounted on vehicle. Perform step (4) if wheel was removed from spare tire retainer.