TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 915 of 1268
TM 9-2320-365-20-3 Change 2 12-3 (5) Turn tire (3) over to gain access to inside wheel section (5). (6) Remove inside wheel section (5) from tire (3). (7) Remove nut (6) and valve (7) from inside wheel section (5). (8) Stand tire (3) on end with beadlock bolts (8) facing up. (9) Push down on beadlock (9) to gain access to four self-locking nuts (10). (10) Remove four self-locking nuts (10), bolts (8) and two clips (11) from beadlock (9). Discard self-locking nuts. (11) Remove beadlock (9) from tire (3). b. Assembly. NOTE (1) Open tire (1) and install beadlock (2) inside tire. (2) Install two clips (3) in beadlock (2) with four screws (4) and self-locking nuts (5). (3) Center beadlock (2) in tire (1). WARNING Tire weighs approximately 350 lbs (159 Kgs). Use extreme care when handling tire. Failure to comply may result in injury to personnel. NOTE Steps (5) through (11) require the aid of an assistant. Steps (1) through (6) require the aid of an assistant.