TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 914 of 1268
TM 9-2320-365-20-3 Section II. MAINTENANCE PROCEDURES 12-2. WHEEL REPAIR This task covers: a. Disassembly b. Assembly c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Wheel removed (TM 9-2320-365-10). CTIS hose assemblies, manifold valve, kneeling valve and bracket removed (para 12-5). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Iron, Tire (Item 20, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C) Wrench Set, Socket (Item 48, Appendix C) Materials/Parts Packing, Preformed (Item 169, Appendix G) Nut, Self-Locking (20) (Item 132, Appendix G) Nut, Self-Locking (4) (Item 152, Appendix G) Personnel Required (2) References TM 9-2610-200-14 WARNING • Ensure that tire is totally deflated before removing self-locking nuts. Failure to comply may result in serious injury or death to personnel. • Always use an inflation safety cage to inflate tires mounted on multipiece rims, and tire/rim assemblies not mounted on a tire changing machine that has a positive lock down device designed to hold the assembly during inflation (TM 9-2610-200-14). When using a tire changing machine, always follow manufacturer’s mounting and safety instructions. Failure to comply may result in serious injury or death to personnel. Always inflate tires that are mounted on rims with demountable side ring flanges or lockrings an inflation safety cage or serious injury or death may result. a. Disassembly. CAUTION Loosen self-locking nuts no more than 1/2 inch (1.27 cm) at a time. Failure to comply may result in damage to equipment. (1) Loosen 20 self-locking nuts (1) approximately 1/2 in. (1.27 cm) at a time. (2) Remove 20 self-locking nuts (1) from outside wheel section (2). Discard self-locking nuts. (3) Remove outside wheel section (2) from tire (3). (4) Remove preformed packing (4) from inside wheel section (5). Discard preformed packing. 12-2