TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 909 of 1268
TM 9-2320-365-20-3 (5) Install filter (9) in air compressor governor (8). (6) Install caged spring assembly (10) in air compressor governor (8) with retaining ring (11). (7) Install preformed packing (12) and cover (13) on air compressor governor (8). e. Installation. (1) Position gasket (1) and air compressor governor (2) on air compressor (3) with two screws (4). (2) Tighten two screws (4) to 110-150 lb-in. (12-17 N·m). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (3) Apply sealing compound to threads of two fittings (5). (4) Install two fittings (5) in air compressor governor (2). Change 1 11-144.3