TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 906 of 1268
TM 9-2320-365-20-3 11-29. AIR COMPRESSOR GOVERNOR REPLACEMENT/REPAIR/ADJUSTMENT This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Adjustment g. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Air tanks drained (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) STE/ICE-R (Item 39, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Antiseize Compound (Item 63, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Repair Kit, Governor (Item 213.1, Appendix G) References TM 9-4910-571-12&P Personnel Required (2) a. Removal. NOTE Tag air hoses and connection points prior to disconnecting. (1) Disconnect two air compressor governor hoses (1) from fittings (2). (2) Remove two fittings (2) from air compressor governor (3). 11-144 Change 1