TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 901 of 1268
TM 9-2320-365-20-3 11-28. LOW PRESSURE TRANSMITTER TWO-WAY CHECK VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Air tanks drained (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Antiseize Compound (Item 63, Appendix D) Adhesive (Item 8, Appendix D) Lockwasher (2) (Item 90, Appendix G) Adhesive (Item 9, Appendix D) a. Removal. NOTE Perform step (1) on vehicle serial number 7448 and higher and vehicle serial numbers 0001 through 7447 that have previously had front lights cable assembly replaced. (1) Remove adhesives and boot (1) from low pressure transmitter (1.1). NOTE Tag wires, air hoses, and connection points prior to removal. (1.1) Remove adhesive, two nuts (2), lockwashers (3), and terminal lugs TL201 (4) and TL202 (5) from low pressure transmitter (1.1). Discard lockwashers. Change 1 11-139