TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 888 of 1268

TM 9-2320-365-20-3 11-24. FRONT BRAKE TWO-WAY CHECK VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Air tanks drained (TM 9-2320-365-10). Windshield washer reservoir and pump removed (para 18-2). Cab raised (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Antiseize Compound (Item 63, Appendix D) Nut, Self-Locking (Item 148, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Tag air hoses and connection points prior to disconnecting. (1) Disconnect two air hoses (1) from 90-degree fittings (2). (2) Disconnect air hose (3) from 45-degree fitting (4). (3) Remove self-locking nut (5), front brake two- way check valve (6), screw (7), and washer (8) from front fender (9). Discard self-locking nut. 11-126 Change 1