TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 881 of 1268
TM 9-2320-365-20-3 11-22. REAR GLADHAND REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Air tanks drained (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Vise, Machinist (Item 46, Appendix C) Socket Set, Impact (Item 33, Appendix C) Materials/Parts Filter Element (Item 13, Appendix G) Damping Fluid (Item 20, Appendix D) Packing, Preformed (Item 171, Appendix G) Antiseize Compound (Item 63, Appendix D) Lockwasher (Item 61, Appendix G) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Both rear gladhands are removed the same way. EMERGENCY gladhand shown. (1) Remove dummy coupling (1) from gladhand (2). (2) Disconnect air hose (3) from reducer fitting (4). NOTE Steps (3) and (4) require the aid of an assistant. (3) Remove reducer fitting (4) from adapter fitting (5). (4) Remove nut (6), lockwasher (7), gladhand (2), and identification plate (8), from rear crossmember (9). Discard lockwasher. Change 1 11-119