TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 879 of 1268
TM 9-2320-365-20-3 (5) Disconnect air hose (9) from 90-degree fitting (10). (6) Remove 90-degree fitting (10) from adapter (6). (7) Remove nut (11), lockwasher (12), adapter (6), identification plate (13), and plate (14) from mounting bracket (4). Discard lockwasher. b. Installation. NOTE • Both front gladhands are installed the same way. Service gladhand shown. • Install plastic cable ties as required. (1) Install plate (1), identification plate (2), and adapter (3) on mounting bracket (4) with lockwasher (5) and nut (6). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (2) Apply antiseize compound to threads of 90-degree fitting (7). (3) Install 90-degree fitting (7) in adapter (3). (4) Connect air hose (8) to 90-degree fitting (7). 11-117