TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 878 of 1268
TM 9-2320-365-20-3 11-21. FRONT GLADHAND REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Air tanks drained (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Filter Element (Item 13, Appendix G) Damping Fluid (Item 20, Appendix D) Packing, Preformed (Item 171, Appendix G) Antiseize Compound (Item 63, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Lockwasher (Item 62, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE • Both front gladhands are removed the same way. Service gladhand shown. • Remove plastic cable ties as required. (1) Remove dummy coupling (1) from gladhand (2). (2) Remove dummy coupling chain (3) from mounting bracket (4). (3) Remove gladhand (2) and reducer (5) from adapter (6). NOTE Note orientation of preformed packing and filter prior to removal. (4) Remove reducer (5), preformed packing (7), and filter (8) from gladhand (2). Discard filter and preformed packing. 11-116 Change 1