TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 876 of 1268
TM 9-2320-365-20-3 11-20. SECONDARY AND PRIMARY AIR TANKS REPLACEMENT (CONT) WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (3) Apply antiseize compound to threads of one-way check valve (3), branch tee fitting (4), 45-degree fitting (5), and run tee fitting (6). (4) Install one-way check valve (3) in primary air tank (2). (5) Install branch tee fitting (4) in one-way check valve (3). (7) Install 45-degree fitting (5) in primary air tank (2). (8) Install run tee fitting (6) in primary air tank (2). NOTE Perform step (9) on all models not previously equipped with corrosion enhanced clamps. (9) Position two clamps (7) on battery box (8). (10) Position primary air tank (2) in two clamps (7) with self- locking nuts (8.1). (10.1) Tighten two self-locking nuts (8.1). 11-114 Change 1