TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 828 of 1268
TM 9-2320-365-20-3 11-13. RELAY VALVE REPLACEMENT (CONT) b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of plug (1), two 90-degree fittings (2), 90-degree fitting (3), two fittings (4), and 45-degree fitting (5). (2) Install plug (1) in relay valve (6). (3) Install two 90-degree fittings (2) in relay valve (6). (4) Install 90-degree fitting (3) in relay valve (6). (5) Install two straight fittings (4) in relay valve (6). (6) Install 45-degree fitting (5) in relay valve (6). (7) Position relay valve (6) on panel (7) with two washers (8), screws (9), and self-locking nuts (11). (8) Tighten two self-locking nuts (11) to 14-18 lb-ft (20-24 N·m). 11-72 Change 1