TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 822 of 1268
TM 9-2320-365-20-3 11-12. INVERSION VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Air tanks drained (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Antiseize Compound (Item 63, Appendix D) Nut, Self-Locking (2) (Item 148, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Tag air hoses and connection points prior to disconnecting. (1) Disconnect two air hoses (1) from branch tee fitting (2). (2) Disconnect two air hoses (3) from 90-degree fittings (4). (3) Disconnect two air hoses (5) from run tee fitting (6). 11-66 Change 1