TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 815 of 1268
TM 9-2320-365-20-3 (17) Shut down engine (TM 9-2320-365-10). (18) Drain primary air tank (TM 9-2320-365-10). (19) Disconnect test cable (12) from pressure transducer (11). (20) Remove pressure transducer (11) from tee fitting (10). (21) Disconnect air hose (5) from 90-degree fitting (6). (22) Remove 90-degree fitting (6) from left rear service brake air chamber (7). (23) Disconnect center air hose (8) from 90-degree fitting (9). (24) Remove 90-degree fitting (9) from tee fitting (10). (25) Remove tee fitting (10) from left rear service brake air chamber (7). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (26) Apply antiseize compound to threads of two 90-degree fittings (6 and 9). (27) Install 90-degree fitting (9) in left rear service brake air chamber (7). (28) Connect center air hose (8) to 90-degree fitting (9). (29) Install 90-degree fitting (6) in left rear service brake air chamber (7). (30) Connect air hose (5) to 90-degree fitting (6). Change 1 11-59/(11-60 Blank)