TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 808 of 1268
TM 9-2320-365-20-3 11-10. LOAD SENSING VALVE AND CONTROL CABLE REPLACEMENT/ADJUSTMENT (CONT) b. Load Sensing Valve Control Cable Installation. WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (1) Apply adhesive to threads of screw (1). (2) Position load sensing valve control cable (2) on bracket (3) with screw (1). (3) Tighten screw (1) to 35-43 lb-ft (48-58 N·m). CAUTION Load sensing valve control cable must be installed in cable clamp on back side of control lever, opposite cable clamp screw. Failure to comply may result in damage to load sensing valve control cable. (4) Install load sensing valve control cable (2) in cable clamp (4). (5) Perform load sensing valve adjustment. 11-54