TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 797 of 1268
TM 9-2320-365-20-3 (22) Connect six air hoses (16) to tee fittings (13, 14, and 15). (23) Start engine (TM 9-2320-365-10) and allow time for REAR BRAKE AIR pressure gage to reach at least 100 psi. (24) Push in SYSTEM PARK control (TM 9-2320-365-10). (25) Loosen two nuts (17) on caging bolts (18). (26) Remove two caging bolts (18) from front and rear air chambers (2 and 10). NOTE Steps (27) through (29) require the aid of an assistant. (27) Apply brake pedal and continue holding until steps (28) and (29) are accomplished. (28) Hand tighten collet nuts (1 and 9) against plunger housings (3 and 11). (29) Tighten collet nuts (1 and 9) 3/16 turn (1/2 teeth). Change 1 11-43