TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 796 of 1268
TM 9-2320-365-20-3 11-8. REAR BRAKE AIR CHAMBER REPLACEMENT (CONT) (13) Install collet nut (9) on rear air chamber (10) to bottom of threads. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (14) Apply sealing compound to threads of rear air chamber (10). WARNING Ensure rear air chamber is caged prior to installation. Failure to comply may result in injury to personnel. (15) Install rear air chamber (10) in plunger housing (11) until it bottoms. CAUTION Loosen rear air chamber no more than one full turn. Failure to comply may result in damage to equipment. (16) Tighten collet nut (9) against plunger housing (11). NOTE Clean fittings and rear air chamber of all sealing compound residue prior to installation. (17) Apply sealing compound to threads of adapter (12). (18) Install adapter (12) in rear air chamber (10). (19) Apply sealing compound to tee fittings (13, 14, and 15). (20) Install tee fittings (13 and 14) in rear air chamber (10). (21) Install tee fitting (15) in adapter (12). 11-42